Ⅰ、Equipment Application：

This testing machine is suitable for various tests such as tensile, compression, bending, shearing, peeling, and tearing of metallic and non-metallic materials. Examples include rubber, plastics, wires and cables, composite materials, profiles, metal rods, plates, springs, and components. It complies with GB and ISO testing standards and can be customized according to user requirements.

II、Main Technical ：

1、Maximum Testing Force (kN): 600

2、Relative Error of Testing Force Indication: ≤ ±0.5%

3、 Testing Force Measurement Range: 0.4%~100% of the maximum testing force (full range without segmentation)

4、Strain Rate Error: ≤ ±0.5%

5、 Constant Displacement Control Range (mm/min): 0.01-250

6、 Relative Error of Displacement Speed: ≤ ±0.5%

7、Clamping Method: Hydraulic clamping

8、Clamping Diameter Range for Round Specimens (mm): Φ5~Φ55

9、Clamping Thickness Range for Flat Specimens (mm): 0~55

10、Maximum Tensile Testing Space (mm): 550

11、Maximum Compression Testing Space (mm): 1100

12、Upper and Lower Compression Plate Dimensions (mm): Φ120

Ⅲ、Standard Product Configuration:

1、Servo driver

2、 Servo motor

3、Electronic extensometer

4、Precision ball screws

5、Fixtures: One set each of standard tensile and compression fixtures

6、Tianchen three-closed-loop universal test card (built-in computer)

7、One set of tensile accessories

8、One set of compression accessories

9、Electrical control cabinet and clamping oil source (1 set)

10、Computer (1 unit)

11、Printer (1 unit)

12、One set of accompanying documents

13、One set of accompanying tools

14、Specialized testing software: TENSONTEST universal testing software. Fully open, with free upgrade services.

IV、Product Functions and Features:

1、Mainframe

1.1 The machine adopts a floor-standing structure, an imported full-digital AC servo drive system and motor, an imported load sensor, and a fully digital measurement and control system. This ensures high-precision, wide-range measurement and three-closed-loop control. The imported full-digital AC servo motor and drive provide high control precision, stability, smooth and reliable operation, fast response, low noise, and complete protection functions such as overload, overcurrent, overvoltage, undervoltage, overheating, abnormal stop, and fault alarm. Parameters can be adjusted for different machine models and test types, using servo system position control to overcome zero drift and instability at low speeds.

1.2  The transmission system uses precision ball screws and a precision reduction mechanism, ensuring smooth transmission and low noise with no gaps.

1.3 Equipped with upper and lower travel limit protection for the movable crossbeam, ensuring equipment safety.

2、Measurement and Control System，

2.1 Uses imported electronic components with a fully digital design；

2.2 Conforms to PCIE bus standards, enabling automatic recognition and installation for plug-and-play functionality；

2.3 Integrates dual-channel precision amplifiers with digital zeroing；

2.4 The data acquisition system consists of four high-precision 24-bit A/D conversion channels, with expandable channels and no segmentation over the full range.

2.5 Supports three optical encoder inputs with a quadrature pulse frequency of up to 5 MHz, featuring error correction, direction identification, and counting capabilities；

2.6 The electronic measurement system avoids analog components like potentiometers, ensuring stability and easy maintenance；

2.7 Built-in large-scale FPGA programmable devices enable high-speed calculations and real-time processing.

3、Testing Software，The software supports multiple control modes, including constant force, constant displacement, constant deformation, and program control. During testing, it can display various test curves in real time, such as force-displacement, force-time, and force-deformation curves. Users can switch between curves automatically and observe comparisons. The control and data processing of the testing process fully comply with the national standards for metallic and non-metallic materials.

3.1 Supports configuration of multiple force and deformation sensors with on-demand switching.

3.2 The professional testing software is highly versatile and includes various standard testing methods for metallic and non-metallic materials. Custom standards or methods can be provided per user requirements.

3.3 The program features an open database structure, allowing users to modify and add custom projects as needed and to edit various report formats.

3.4 The modular design divides the software into several modules, including:

3.4.1 Test Module: Main interface and test control center；

3.4.2 Parameter Management Authority: Prevents non-debugging personnel from accessing parameter adjustment modules；

3.4.3New Data Module: Create single or batch test data parameters；

3.4.4 Data Query Module: Search test data using multiple filtering criteria；

3.4.5 Parameter Adjustment Module: Control unit for equipment parameters；

3.4.6 Report Printing Module: Customizable test reports

3.5 Includes various auxiliary programs:

3.5.1Debug Toolbox Configuration Program: Adjust system configuration parameters；

3.5.2 Batch Processing Program: Compare curves and statistics for samples in the same batch；

3.5.3nReport Processing Program: Advanced custom reports for editing any report format

3.6 Overload protection: Automatically stops the machine when the load exceeds 2%-10% of the rated value.

3.7 Pre-configured data interface for direct connection to the laboratory’s comprehensive information management network.