Ⅰ、Equipment Application:  

This machine is primarily used for testing the mechanical performance indicators of various metallic and non-metallic materials. It is widely applicable in construction engineering quality inspection departments, product quality testing organizations, universities, and aerospace research institutions.

Ⅱ、Technical Specifications:

1、Maximum Test Force: 20 kN

2、Test Force Measurement Range: (0.2–20) kN；

3、Test Force Accuracy: Better than ±0.5% of the displayed value；

4、Crossbeam Displacement Measurement: Resolution higher than 0.001 mm；

5、Relative Displacement Error: Less than ±0.5%；

6、Crossbeam Speed Range: 0.01 mm/min to 500 mm/min, stepless speed regulation, adjustable as needed；

7、Effective Tensile Space: 650 mm；

8、Power Supply: Single-phase, 220V±10%, 50Hz；

9、Operating Environment: Room temperature to 30°C, relative humidity not exceeding 80%；

10、Dimensions: 685 × 490 × 1540 (mm)；

11、Weight: 200 kg

Ⅲ、Main Components:

1、High-precision 20 kN load sensor；

2、Fully digital servo motor and servo driver；

3、High-precision ball screw；

4、Lenovo-branded computer with a widescreen LCD monitor；

5、HP printer；

6、High-precision data acquisition board (24-bit A/D data acquisition), enabling full digital adjustment, high-accuracy amplification, and precise control (integrated into the computer)

7、One set of tensile and compression fixtures

Ⅳ、Product Features and Functions:

1、Mainframe

1.1  The product adopts a portal structure, combining compactness with elegance.

1.2  Equipped with one set of tensile and compression fixtures.

1.3  Fully digital AC servo motor and driver ensure reliable and stable performance, with overcurrent and overvoltage protection devices.；

1.4  Precision ball screws and a high-accuracy reduction mechanism provide smooth transmission and low noise.

2、 Control and Measurement System:

2.1  Auto Zeroing: The system automatically resets to zero when the test starts；

2.2  Auto Range Switching: Automatically adjusts to the appropriate range based on the load to ensure accuracy；

2.3  Automated Testing: The system completes the test process automatically once settings are configured；

2.4  Batch Testing: Enables automatic testing for multiple samples of the same specifications after a single setup；

2.5  Automatic Printing: Prints test results automatically after the test is completed；

2.6  Real-time Display: Displays test force and peak force values in real time.；

2.7  Limit Protection: Features both programmable and mechanical limit protection.；

2.8 Overload Protection: Automatically halts operation when the load exceeds 2%-10% of the maximum value；

2.9 Emergency Stop: Equipped with an emergency stop switch for cutting power in critical situations.