Ⅰ、Equipment Application:

    This machine is primarily used to test the mechanical properties of various metal and non-metal materials. It is widely applicable in construction quality inspection departments, product quality testing institutions, universities, and aerospace research organizations.

II. Technical Specifications:

1、Maximum Testing Force: 100 kN；

2、Testing Force Measurement Range: (1–100) kN；

3、Testing Force Accuracy: Better than ±0.5% of the indicated value；

4、Crosshead Displacement Measurement Resolution: Greater than 0.001 mm；

5、Displacement Relative Error: Less than ±0.5%；

6、Crosshead Speed Range: 0.01 mm/min–500 mm/min, stepless adjustment, arbitrarily set；

7、Effective Tensile Space: 650 mm；

8、Testing Space Width: 400 mm；

9、Power Supply Voltage: 220V ±10%, 50Hz；

10、Operating Environment: Room temperature–30°C, relative humidity not exceeding 80%；

11、Mainframe Dimensions: Approximately 785×650×1860 mm；

12、Weight: 300 kg

III. Main Configurations:

1、High-Precision 100 kN Load Sensor；

2、Fully Digital Servo Motor and Servo Driver；

3、High-Precision Ball Screw Mechanism；

4、Lenovo Brand Computer with Widescreen LCD Display；

5、HP Printer；

6、High-Precision Data Acquisition Board (24-bit A/D conversion), enabling fully digital adjustment, high-precision amplification, and precise control (integrated within the computer)

7、One set of tensile fixtures (flat jaw 7–14 mm, round jaw Ø9–Ø14) and one set of compression fixtures (Ø150)

IV. Product Features and Characteristics:

1、Mainframe

1.1 The product adopts a portal structure, compact and aesthetically pleasing；

1.2 Standard configuration includes one set each of tensile and compression fixtures；

1.3 Equipped with an AC motor and servo driver, providing reliable and stable performance with overcurrent and overvoltage protection；

1.4 Precision ball screw and high-accuracy deceleration mechanism ensure smooth transmission, low noise, and zero backlash.

2、2. Measurement and Control System, Operating Software, and Data Processing System

Advanced integrated chip technology and professionally designed data acquisition and amplification system ensure high integration, reliability, and ease of use. The control software automatically calculates common parameters such as elastic modulus, yield strength, tensile strength, and fracture strength. It can compute force, stress, displacement, and deformation data at any specified point during testing. The system’s control and data processing capabilities comply with national standards for metal and non-metal materials.

2.1 Automatic Zeroing: The control system automatically resets upon receiving the test start command；

2.2 Automatic Range Switching: Automatically switches to the appropriate range based on the load size to ensure measurement accuracy；

2.3 Automatic Testing: Once the test settings are complete, the process executes automatically；

2.4 Batch Testing: For samples of the same specifications, a single setup enables automatic completion of batch tests；

2.5 Automatic Printing: Automatically prints test results upon test completion；

2.6 Real-Time Display: Displays testing force and peak force in real-time；

2.7 Limit Protection: Provides both program-controlled and mechanical limit protection；

2.8 Overload Protection: Automatically stops the machine if the load exceeds 2%–10% of the maximum capacity；

2.9 Emergency Stop: Equipped with an emergency stop switch to cut off power in critical situations.