Ⅰ、Equipment Application:

This machine is primarily used for testing the mechanical performance indicators of various metal and non-metal materials. It is widely applicable in construction engineering quality inspection departments, product quality inspection agencies, universities, and aerospace research institutions.

Ⅱ、Technical Specifications:

1、Maximum Test Force: 10 kN

2、Test Force Measurement Range: (0.1–10) kN；

3、Test Force Accuracy: Better than ±0.5% of the indicated value；

4、Crosshead Displacement Measurement Resolution: Higher than 0.001 mm；

5、Relative Displacement Error: Less than ±0.5%；

6、Crosshead Speed Range: 0.01 mm/min to 500 mm/min, stepless speed regulation, adjustable as required；

7、Effective Tensile Space: 650 mm；

8、Power Supply: Single-phase, 220 V ± 10%, 50 Hz；

9、Operating Environment: Room temperature to 30°C, relative humidity not exceeding 80%；

10、Mainframe Dimensions: 685 × 490 × 1540 mm；

11、Weight: 200 kg

III、Main Configuration:

1、10 kN High-Precision Load Sensor；  

2、Fully Digital Servo Motor and Servo Driver；

3、High-Precision Ball Screw；

4、Lenovo Computer with Wide-Screen LCD Monitor；

5、HP Printer；

6、High-Precision Data Acquisition Board:

Features 24-bit A/D data acquisition, enabling fully digital adjustment, high-precision amplification, and accurate control (integrated into the computer).。

7、Tensile and Compression Fixtures: One set each.。

IV、Product Functions and Features：

1、Mainframe:

1.1The product adopts a portal frame structure, compact and aesthetically pleasing.

1.2 Equipped with one set each of tensile and compression fixtures.

1.3 Features a fully digital AC servo motor and servo driver with reliable and stable performance, as well as overcurrent and overvoltage protection devices；

1.4 Utilizes a high-precision ball screw and precision reducer transmission for smooth operation and low noise.

2、Measurement and Control System

2.1 Automatic Zeroing: The system automatically zeros when the test begins

2.2 Automatic Range Switching: Automatically switches to the appropriate range based on the load size to ensure measurement accuracy；

2.3 Automatic Testing: Once the test settings are completed, the system can automatically execute the test process；

2.4 Batch Testing: For specimens of the same specifications, the system can perform tests on an entire batch with one-time setup；

2.5 Automatic Printing: Automatically prints the test results upon completion；

2.6 Real-Time Display: Displays test force and peak values in real time；

2.7 Limit Protection: Equipped with both program-controlled and mechanical limit protection；

2.8 Overload Protection: Automatically shuts down when the load exceeds 2%-10% of the maximum value；

2.9 Emergency Stop: Includes an emergency stop button to cut off power in case of emergencies.